Setting user data, user access level, user door groups, access mode etc.

There are two ways to open the ”User Card Edit” window:and

Step 1. User Num: User Num= user address which depend on the controller user capacity, 1-1,024 or 1- 14,999.
Step 2. Lock: When you edit the user data, please tick “Lock” to avoid switching and unstable.
Step 3. Auto Save Card ID: when enroll new card, please tick here then present the card to the controller reader to auto save card ID.
Step 4. Card ID: card ID is the manufactured ID.
Step 5. Access Mode: invalid, Card only, Card or Pin, Card and Pin for select (refer to ).
Step 6. Zone: 1 to 63 zones, All= Not limited (refer to ).
Step 7. Level: user level setting, 00 to 63 degree.
Step 8. Door Group: 1 to 253 groups. All= Not limited, No= Not authorized for any door group,Set= Only support to AR-716E and AR-829E (refer to ). ※ Zone, Level and Door group comparison only support to AR-716E, AR-829E and AR-821EF, not for 7-seriers please kindly mention.
Step 9. Name/Alias: user name will be showed in access records.
Step 10. P.I.N. Code: when access mode is “card or PIN” or “card and PIN” in M4/M8 must set the private access mode password (private PIN), if the M6, you need to set a public access mode password (public PIN).
Step 11. Changealbe: user could change the access PIN in reader side directly. If access controller connect under the Multi-Door Networking Controller(AR-716E) the changed PIN (if access controller connect under the Multi-Door Networking Controller (AR-716E) the modified password be saved in AR-716E).
Step 12. Employe ID
Step 13. Photo: upload user photo to correctly recognized.
Step 14. Date Limits: support to the configuration which within AR-716E, AR-829E or AR-821EF.
Step 15. Depart.: here the department could be edited directly into those two blank.
Step 16. Duty#: there are 50 sets duty for editing (refer to ).
Step 17. User Data: card ID, Birthday, VisaiD, Gender, E-mail, TEL, Addr..
Step 18. Anti-Pass Back: enable user’s anti-pass back function.
Step 19. Guard: only keep the message while flashing the card not release the door.
Step 20. Skip FP Check: when use AR-821EF, if want to disable user’s FP check, please tick here.
Step 21. Cleaner: this is reserved function for hotel system.
Step 22. Press Save button to save all settings.

Door Group

Time Zone

User name: Tom. User address: 00001. Passable time zone and door gruop: Monday to Friday 08:15-17:00 and Sat to Sun 12:00-17:00. His acces mode is card and PIN, but he as long as present the card to the controller reader can pass, because his level is 01 higher than time zone level 00 and door group level 00. In this way can make the access more flexible and applications.

Grade Comparison Chart

Quickly to set time zone and location please refer to the following set (when access controller connect under the Multi-Door Networking Controller(AR-716E)).

Note
When “Door Group” is Set the “Zone” will become invalid. ※This function only be used when access controller connect under the Multi-Door Networking Controller(AR-716E).

Step 1. Selection locaton will be modifed.
Step 2. Press “Modify Zone” to modify time zone(refer to ).
Step 3. Press EXIT button to save all settings.